SDA Series konumohe koranu e mahi angiangi momo pneumatic paerewa kiato rangi rango
Whakaahuatanga Hua
He angiangi te hanga o te puoto me te iti o te rahi, he pai mo nga waa iti te waahi. Ko tana pehanga mahi kei waenga i te 0.1 ~ 0.9mpa, he nui te mahi.
Ko nga rango raupapa SDA he mahi hiri pono me nga ahuatanga nekehanga maeneene. Ka whakamahia e ia nga hangarau hangahanga tino-nui hei whakarite i te piri me te tika o te rango. I te wa ano, ka whakauruhia te cylinder ki tetahi taputapu aukati, ka taea te whakaiti i te paanga me te haruru i te wa e neke ana.
Whakatakotoranga Hangarau
| Rahi Poka(mm) | 12 | 16 | 20 | 25 | 32 | 40 | 50 | 63 | 80 | 100 |
| Aratau Mahi | Mahi Takirua | |||||||||
| Media Mahi | Hau Horoia | |||||||||
| Te Mahi Mahi | 0.1~0.9Mpa(kg/cm) | |||||||||
| Te Pehenga Tohu | 1.35Mpa(13.5kgf/cm) | |||||||||
| Te Mahana Mahi | -5~70 ℃ | |||||||||
| Aratau Pupuri | Me | |||||||||
| Rahi Tauranga | M5 | 1/8 | 1/4 | 3/8 | ||||||
| Rauemi tinana | Aluminum Aluminum | |||||||||
| Whakawhiti Pūoko | CS1-J | CS1-G CS1-J | ||||||||
Whakaahuatanga;SDA100niho ranei 25i roto i te poro piston tokotoko, me nga niho mo Ф 32 piston rod
100≤ST<150, karekau he autō, te roa rango 10.
ST≥150, ahakoa he autō, he kore ranei, te roa o te rango 10.
| Rahi Poka(mm) | Momo Paerewa | Momo aukume | D | B1 | E | F | G | K1 | L | N1 | N2 | O | ||
| A | C | A | C | |||||||||||
| 12 | 22 | 17 | 32 | 27 | / | 5 | 6 | 4 | / | M3X0.5 | / | 7.5 | 5 | M5X0.8 |
| 16 | 24 | 18.5 | 34 | 28.5 | / | 5.5 | 6 | 4 | 1.5 | M3X0.5 | 11 | 8 | 5.5 | M5X0.8 |
| 20 | 25 | 19.5 | 35 | 29.5 | 36 | 5.5 | 8 | 4 | 1.5 | M4X0.7 | 14 | 9 | 5.5 | M5X0.8 |
| 25 | 27 | 21 | 37 | 31 | 42 | 6 | 10 | 4 | 2 | M5X0.8 | 17 | 9 | 5.5 | M5X0.8 |
| 32 | 31.5 | 24.5 | 41.5 | 34.5 | 50 | 7 | 12 | 4 | 3 | M6X1 | 22 | 9 | 9 | G1/8 |
| 40 | 33 | 26 | 43 | 36 | 58.5 | 7 | 12 | 4 | 3 | M8X1.25 | 28 | 9.5 | 7.5 | G1/8 |
| 50 | 37 | 28 | 47 | 38 | 71.5 | 9 | 15 | 5 | 4 | M10X1.5 | 38 | 10.5 | 10.5 | G1/4 |
| 63 | 41 | 32 | 51 | 42 | 84.5 | 9 | 15 | 5 | 4 | M10X1.5 | 40 | 12 | 11 | G1/4 |
| 80 | 52 | 41 | 62 | 51 | 104 | 11 | 20 | 6 | 5 | M14X1.5 | 45 | 14.5 | 14.5 | G3/8 |
| 100 | 63 | 51 | 73 | 61 | 124 | 12 | 20 | 7 | 5 | M18X1.5 | 55 | 17 | 17 | G3/8 |
| Rahi Poka(mm) | P1 |
| 12 | Te taha rua: Ф6.5 ThreadM5*0.8 Na roto i te poka Ф4.2 |
| 16 | Te taha rua: Ф6.5 ThreadM5*0.8 Na roto i te poka Ф4.2 |
| 20 | Taha rua:Ф 6.5 MiroM5*0.8 Na roto i te poka Ф4.2 |
| 25 | Taha rua:Ф 8.2 MiroM6*1.0 Na roto i te poka Ф4.6 |
| 32 | Taha rua:Ф 8.2 MiroM6*1.0 Na roto i te poka Ф4.6 |
| 40 | Te taha rua: Ф10 ThreadM6*1.25 Na roto i te poka Ф6.5 |
| 50 | Te taha rua: Ф11 ThreadM6*1.25 Na roto i te poka Ф6.5 |
| 63 | Te taha rua: Ф11 ThreadM8*1.25 Na roto i te poka Ф6.5 |
| 80 | Taha rua: Ф14 MiroM12*1.75 Na roto i te poka e:Ф9.2 |
| 100 | Taha rua: Ф17.5 MiroM14*12 Na roto i te poka Ф11.3 |
| Rahi Poka(mm) | P3 | P4 | R | S | T1 | V | W | X | Y |
| 12 | 12 | 4.5 | / | 25 | 16.2 | 6 | 5 | / | / |
| 16 | 12 | 4.5 | / | 29 | 19.8 | 6 | 5 | / | / |
| 20 | 14 | 4.5 | 2 | 34 | 24 | 8 | 6 | 11.3 | 10 |
| 25 | 15 | 5.5 | 2 | 40 | 28 | 10 | 8 | 12 | 10 |
| 32 | 16 | 5.5 | 6 | 44 | 34 | 12 | 10 | 18.3 | 15 |
| 40 | 20 | 7.5 | 6.5 | 52 | 40 | 16 | 15 | 21.3 | 16 |
| 50 | 25 | 8.5 | 9.5 | 62 | 48 | 20 | 17 | 30 | 20 |
| 63 | 25 | 8.5 | 9.5 | 75 | 60 | 20 | 17 | 28.7 | 20 |
| 80 | 25 | 10.5 | 10 | 94 | 74 | 25 | 22 | 36 | 26 |
| 100 | 30 | 13 | 10 | 114 | 90 | 25 | 22 | 35 | 26 |
